| |
Tile Saws
Imer Combi 250 VA (c/w Blade & Stand)
|
|
10" Tile & Stone Saw
- Technical Specifications |
| Blade Guard Capacity...........................................10" |
| Motor 115V - 60 HZ............................................1.5
H.P. |
| Max Blade Shaft Rpm - no load............................2,800 |
| Cutting Table Dimensions......................................L
36" X W 20" |
| Maximum Length of Cut, Rip or Diagonal..............29"
/ 31 " w Plunge Cut |
| Maximum cutting depth 90 degrees / 45 degrees....2.5"
/ 1.25" |
| Water pan Capacity..............................................10
Gallons |
| Saw Dimensions (boxed).......................................L
40" X W 22 " X H 18 " |
| Weight..................................................................70
Lbs. |
Imer Combi 250/1000 VA Lite (c/w 2 blades, Stand and Side Table )
|
|
Laser Guided |
|
Cut to 45 degrees |
|
Plunge cuts |
|
Side table included |
10" Laser Guided Tile & Stone Saw - Technical Specifications |
| Blade Guard Capacity...........................................10" |
| Motor 115V - 60 HZ............................................1.5 H.P. |
| Max Blade Shaft Rpm - no load............................2,800 |
| Cutting Table Dimensions......................................L 48 " X W 30" |
| Maximum Length of Cut, Rip or Diagonal..............37" / 40 " w Plunge Cut |
| Maximum cutting depth 90 degrees / 45 degrees....2.5" / 1.25" |
| Water pan Capacity..............................................12 Gallons |
| Saw Dimensions (boxed).......................................L 55 " X W 25" X H 24 " |
| Weight..................................................................80 Lbs. |
Back to Top
Imer Combi 1000 14" Tile & Stone Saw (c/w Blade & Stand)
  |
14" Tile & Stone Saw - Technical
Specifications |
| Blade Guard Capacity...........................................14" |
| Motor 115V - 60 HZ............................................3 H.P. |
| Max Blade Shaft Rpm - no load............................2,190 |
| Maximum Length of Cut, Rip or Diagonal..............39" |
| Maximum cutting depth 90 degrees / 45 degrees....4.75" / 2.75" |
| Saw Dimensions (boxed).......................................L 63 "
X W 29 1/2" X H 51" |
| Weight (Crated)....................................................304
Lbs. (347 Lbs.) |
Target #TA10100 Tilematic 10" Tile Saw
 |
10" Tile & Stone Saw - Technical
Specifications |
| Blade Guard Capacity..........10" |
| Blade Shaft Rpm..................2,760 |
| Maximum Depth of Cut........3 3/4" |
| Maximum Material Size........Up to 18" Wide |
| Cut Size / Type....................One pass rip on 18", Rip, Plunge,
Bevel, 45 Degrees miter, Compound Angles |
| Motor .................................1.5 H.P. 115 Volt, 60 Hz |
| Water Pump..................... 100 G.p.h. 115V, 60 Hz, 1 Ph, .5amps |
| Weight (Crated) ................105 lbs. (116 Lbs.) |
| Aluminum Conveyor Cart / Cast Aluminum Rip Guide |
Gemini Tilemaster Saws
  |
| Motor |
1/5 HP, 110/220 Volt, 50/60 Hz |
| Weight |
12 lbs. |
| Additional Features |
- Transformer installed with European Power Cord
- Converts to Hand Saw
|
Gemini Revolution Saw
 |
| Motor |
1/2 HP, High Torque, 115/220 Volt |
| Blade |
10" Sintered |
| Weight |
55 lbs. |
Back to Top
Concrete Destroyer
(For removing hardened concrete off of tools and equipment)
 |
Concrete Destoyer is an alternative to acids and phosphates. It attacks the portland in cement by completely disolving the hardened cement to a mushy substance that is completely rinseable with high pressure and cold water. Concrete Destroyer can be used to remove cured cement, concrete, mortar, grout or stucco off most surfaces.
|
Back to Top
|
|
